Certification: | ISO9001:2008, ISO9001:2000, RoHS, CE |
---|---|
Tooth Form: | Flat Tooth |
Function: | Cutting |
Samples: |
same best quality and package with volume order
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
HongSheng Saws Manufacturing Co.,ltd Band Saw Blades Product Line:
---Meat Bone Fish Band Saw Blades
---Woodworking Band Saw Blades
---Carbide Tipped Band Saw Blades
---M42 M51 Bimetal Band Saw Blade
Problem | Possible Cause | Advise |
Saw Blade Keeps Breaking Prematurely | 1.Guides tight or maladjusted 2.Speed too low for feed rate 3.Speed too high 4.Blade too thick for wheel diameter 5.Pitch too coarse |
1.Alter adjustment 2.Increase speed or decrease feed 3.Reduce speed 4.Use lighter gauge 5.use finer pitch |
Blade Starts to camber and cuts to one side-Running Out of Square | 1.Saw guides too far apart 2.Feed pressure too high 3.Roller guides not adjusted 4.Band Pitch too fine 5.Set removed by guides 6.Hard inclusion in material |
1.Adjust closer to material 2.Reduce pressure 3.Adjust correctly 4.Use coarser pitch 5.Adjust or chamfer guides 6.Reduce cutting rate |
Vibration Whilst Cutting |
1.Work piece not securely held 2.Incorrect feed pressure 3.Not enough blade tension 4.Wrong speed for thickness 5.Pitch too coarse 6.Wrong tooth form |
1.Improve clamping 2.Adjust 3.Increase tension 4.Adjust 5.Use finer pitch 6.Use variable pitch |
Blade dulls Prematurely | 1.Feed rate too high 2.Speed too high 3.Pitch too coarse 4.Coolant not directed 5.Saw idling through cut 6.Incorrect saw guides for width 7.Teeth running in wrong direction |
1.Increase rate 2.Reduce speed 3.Use finer pitch 4.Direct at point of cut 5.Keep teeth engaged 6.Use correct guides 7.Refit blade correctly |
Blade Twidsting | 1.Saw guide arms too far apart 2.Blade binding in cut 3.Not enough blade tension 4.Blade too wide for radius |
1.Adjust correctly 2.Reduce feed rate 3.Increase tension 4.Use narrower blade |
Suppliers with verified business licenses